How to create or configure a RAID array?

Applicable Models

D2-310, D2-320, D5 Hybrid, D8 Hybrid, D5-300C, D5-310

When creating or switching RAID, both the product and the computer must be powered on, and the product must be connected to the computer.
Locate the rotary switch on the back of the device.
Use a screwdriver to point the switch pointer to the desired array type.
Use a pin to hold down the Reset button for about 5 seconds until the HDD indicator changes from green to red. After about 1 second, the HDD indicator will change from red to green, indicating that the newly set array has taken effect.